Refinishing Wheel Center Caps With Teflon Mini Refinished Painting And An LVL...

Refinishing Wheel Center Caps with Teflon Mini Refinished Painting and an LVLP Spray Gun

Wheel center caps are a small but noticeable part of a car's exterior. Scratched, faded, or mismatched caps can ruin an otherwise perfect appearance. Using teflon mini refinished painting techniques and a mini LVLP spray gun, you can refinish center caps to like-new condition with precision and durability.

1. Common Cap Materials

ABS plastic with Teflon-like coatings

Chrome-plated plastic

Painted aluminum

Each of these requires proper adhesion techniques before refinishing.

2. Surface Prep for Teflon Coated Caps

Wash thoroughly and degrease

Sand lightly with 800–1000 grit

Apply adhesion promoter designed for plastics or coated metals

Optional: Use plastic primer for better hold

3. Spray Gun Setup

Mini LVLP spray gun

0.8mm tip for basecoat

1.0mm for clearcoat

10–12 PSI air pressure

4. Painting Process

Apply 2–3 mist coats of base with 5-minute flash between

Finish with 2 coats of UV-resistant clearcoat

Allow full cure before reinstalling on wheels

5. Why LVLP Is Perfect for Caps

The LVLP spray gun allows detailed control, ensuring even coverage on small curved surfaces without flooding the edge. In teflon mini refinished painting, that control is key for uniform gloss and lasting adhesion.

Keywords: teflon mini refinished painting, LVLP spray gun, wheel center cap painting, plastic trim spray, small surface refinishing, basecoat on ABS parts, low pressure mini refinishing, compact car detailing spray, clearcoat on wheel caps, refinishing curved automotive parts

?

?

Wenzhou Sico Spraying Tech.Co.,Ltd
Add: Daqiao Industrial Area,Beibaixiang Town,Yueqing,Wenzhou,Zhejiang
zip code:325603
Tel:+86-577-67307836
Email:sales@sicotools.com
Mobile/Wechat：+86-13777716892