Proper use of butter guns

With the fierce competition in the market, the styles of butter guns are becoming more and more diversified, but the basic principle of butter guns is similar, and the refueling nozzle is divided into two kinds: nozzle and nozzle, and the accessories are hose and hard pipe. The general construction of the butter gun is composed of the gun head, barrel, handle and handle, and the interior is composed of the leather bowl, bullet, steel ball, tie rod and exhaust screw. On the surface, everyone is diverse. Now, butter guns on the market are generally prone to oil leakage, sand entry, pressure and other problems, which is also the most troublesome thing for users. One reason is the problem of the butter gun itself, and another reason is that some novices are not very familiar with how to use the butter gun, and the operation error leads to the difficult use of the butter gun. For some faults in use. We can find ways to avoid it. For example, before refueling, check whether the butter nozzle on the machine is intact. Choose the grease that must be the first big brand of grease manufacturer. Therefore, we must keep the butter used and the nozzle of the butter gun clean, do not use clean tools to oil, the container of oil should be covered in time. In addition, you can go to the window screen shop to make a few pieces of yarn, cut into the size of the gasket in the butter gun cover, put it into the cover of the butter gun and the gasket of the butter gun together with the old pad, with a few butter can look at the screen. This method is very useful, and there is a fault in use is the pressure of oil, in fact, just add air in our oil gun, this small mistake do not know how many inexperienced novice we do not know at a loss.

If it is hard butter can use suction type to oil (pay attention not to look at the instructions on the method of expecting to be able to suck up the oil, but to pull the rod relatively static reuse gun shell push down, do not have space in the middle ": if it is very soft oil can take a batch of ash knife to the inside of the oil, do not fill the jar to add, to add side, leave a channel, This allows the air to come out when you throw the oil down with your hands (of course, tossing the oil down with your hands is also a good option). The above mentioned some refueling skills, but in actual use, there may still be air inside and not very good to add, this time we need to take some targeted measures.