Part II of the practical Guide to Airbrush Activation

A.?Operation flow of airbrush - loading paint

(suitable for gravity type airbrush)

1. Mix and filter the paint according to the paint manufacturer's instructions.

2. Open the lid and pour the prepared paint into the gun pot. The depth of the paint should not exceed 11cm.

3. Put the lid on the pot.??

B.?Operation flow of airbrush - loading paint

(Suitable for small repair spray gun)

1. Mix the paint according to the paint manufacturer's instructions.

2, open the lid, according to the actual need, the filter can be installed in the gun pot, or use a funnel with the paper filter to filter the paint.

3. Pour the prepared paint into the gun pot, the depth of the paint should not exceed 7cm.

4. Put the lid on the pot.

C.?Operation flow of airbrush - loading paint

(suitable for siphon type airbrush)

1. Mix and filter the paint according to the paint manufacturer's instructions.

2. Open the lid and pour the prepared paint into the gun pot. The depth of the paint should not exceed 12cm.

3. Put the lid on the pot.

4. Install the gun pot at the liquid inlet of the spray gun, and ensure that the pick fixing the pot cover is located directly below the air cap.

D.?Operation flow of airbrush - loading paint

(suitable for pressure spray gun)

1. Mix and filter the paint according to the paint manufacturer's instructions.

2. Open the lid of the pressure pot, pour the prepared paint into the pot, and then close the lid.

3. Use special paint hose to connect the paint export of the paint can and the paint import of the spray gun.