Manual paint spray gun furniture painting skills and craft introduction

Furniture is the most common in our lives, and every family has more or less different types of furniture, so the painting of furniture is a very important issue for every furniture factory. Only a good spraying process can obtain a good surface treatment, and this appearance can be favored by customers.

The specific process of painting furniture with a manual spray gun is as follows: varnish process (three bottoms and two sides)

1. Clean up the surface of the furniture first. If there are pencil marks or other things, use sandpaper to grind them off; (be careful not to whiten the edges when grinding)

2. Spray the primer once, and use putty after drying (putty is generally mixed with color matching powder, cooked rubber powder, and double fly powder, the color of the putty is darker than the color of the board) to fill the pores of the board;

3. Use sandpaper to polish the surface of the board or wood strip;

4. Spray the first primer;

5. After drying, it is blended with adjusted color powder, cooked glue powder and double fly powder. Putty covers up nail holes and tree scars to make it the same as the color matching;

6. After drying, use fine sandpaper to polish the rough part of the toner, this time is very important;

7. Spray the primer for the second time, and then spray it for the third time when it dries quickly. spray primer);

8. After the third time the paint is dry, it is fully polished (the side view can not see the bright spots);

9. Spray the first topcoat with a paint spray gun;

10. The second coat can be sprayed when the first coat is quick-drying.

Paint spray gun manufacturers remind:

1. Pay attention to the humidity of the air when spraying for the second time. If it is too humid, you must wait for the previous paint to dry before grinding and then spray the topcoat;

2. Minimize the dust in the air when spraying the topcoat.

There are many processes for spraying furniture with manual spray guns, but according to such a process, our products can get a better spraying process, so that more high-quality products can be made!