Key points of safety inspection in spraying workplace

1. Spraying workplaces shall not be set up in rural and community houses
2. The spraying operation site should be set on the top floor of a single storey independent workshop or a multi-storey room
3 The spraying operation site is set at the side of the workshop close to the window and separated relatively independently.
Keep the emergency exit unblocked in the spraying workshop
5. Flammable materials such as paint, coating and auxiliary materials in the spraying workplace shall be kept at a safe distance from the spraying platform, which shall not exceed the usage of one operation shift,
6. The temporary storage place for hazardous chemicals meets relevant safety requirements.
7. Spraying equipment (water curtain spraying table, dust-free spraying room) shall be designed and manufactured by regular manufacturers
8 Effective ventilation and purification facilities shall be provided in the spraying workplace
9. The electrical facilities in the spraying workplace must be explosion-proof electrical equipment
10. The electrical lines must be laid with galvanized pipes and properly grounded, and lightning protection and anti-static measures shall be taken.
11. Corresponding fire fighting equipment (manual dry powder extinguisher, fire sand) shall be provided.
12. Safety warning signs shall be set up in the workplace (no fireworks, occupational hazards, etc.).
13. Provide dust-proof and anti-virus labor protection articles that meet the standard requirements, and supervise and educate them to wear and use correctly.
14. Timely and truthfully declare the occupational disease hazards in the spraying workplace, carry out occupational disease hazard detection in the workplace, and conduct occupational health examination for the operators in the workplace
15. Timely clean the oil stain on the equipment and ground
16. Strengthen staff safety education and emergency response ability training.