How To Refinish Teflon-Coated Interior Trim With An LVLP Spray Gun

How to Refinish Teflon-Coated Interior Trim with an LVLP Spray Gun

Interior trim pieces - such as dashboard accents, air vent bezels, and center console panels - often have a Teflon-like low-friction coating. Refinishing these with teflon mini refinished painting techniques and an LVLP spray gun allows for clean, durable, and factory-like results.

1. Why Teflon Interior Trim Is Tricky

Teflon surfaces resist paint adhesion

Many trims are irregularly shaped and prone to overspray

Flexibility is often required in clearcoat to resist cracking

2. Prep Is Critical

Clean thoroughly with isopropyl alcohol or solvent

Lightly scuff surface with gray scuff pad

Apply a plastic or Teflon-specific adhesion promoter

Use flexible primer if needed

3. Spray Setup

Mini LVLP spray gun

0.8mm–1.0mm tip

10–12 PSI at the cap

4–5 inch spray distance

4. Application Steps

Apply 2 light basecoat coats with 50% overlap

Flash 5–8 minutes between coats

Apply 2 coats of satin or matte clear, depending on OEM spec

5. LVLP Spray Gun Advantage

Interior parts are small and require precision. An LVLP spray gun helps reduce overspray and gives you fine atomization, which is ideal for teflon mini refinished painting on confined or complex shapes.

Keywords: teflon mini refinished painting, LVLP spray gun, interior trim refinishing, dashboard spray technique, low friction surface painting, plastic adhesion primer, satin clearcoat finish, auto interior detailing spray, compact spray gun, refinishing coated surfaces

?

?

Wenzhou Sico Spraying Tech.Co.,Ltd
Add: Daqiao Industrial Area,Beibaixiang Town,Yueqing,Wenzhou,Zhejiang
zip code:325603
Tel:+86-577-67307836
Email:sales@sicotools.com
Mobile/Wechat：+86-13777716892